I decided to build a Colpitts oscillator after watching one of W2AEW’s videos.

Circuit Board

Circuit Board

Frequency Counter

Frequency Counter

Waveform on the scope

Waveform on the scope

The only issue I ran into was that I had the power supply hooked up backwards, so when I initially connected it to the scope, the +12V shorted to ground (and it burned a small hookup wire in the process).  I should have paid more attention to the testing that W2AEW describes in his video – on a second try, I was seeing -7V where I should have been seeing +5V.  And I shouldn’t have trusted the two hookup wires I was using to get from a computer power supply output to a circuit.

I also didn’t have 2N2222 or 2N5904 transistors, I used 2N3904s, which seem to work fine.

-73-


Category: Electronics

About the Author

Andrew is the owner of this blog and enjoys computer programming, building things, and photography. He's a pretty busy guy, which explains why updates to this blog are so infrequent.

Comments are closed.


%d bloggers like this:

This is the new server