I had a problem in the truck recently.  The air conditioning went out.  Right as the sultry steamy 90º Cincinnati summer started.

As I started looking into things, the lone (obvious) symptom was that the fuse had blown.  The air conditioner would run if I replaced the fuse, but would go out quickly.

It didn’t help when I let my XYL drive my truck one evening, and she didn’t use the ham radio and had A/C the entire trip (roughly 20 miles).  This was after I read something about a wire being stuck under the intake on a forum.  However, it went out on me the next day.

So I took apart the truck.  It didn’t take long to realize that the intake was smashing the air conditioner compressor clutch wire (in the first pic – with the blue plug going to that thing with a belt on it).  The second pic shows what that smashing really did – it wore the wire insulation down to the point where it could complete a circuit to ground via the air conditioning line (thus causing the fuse to blow).

A/C Compressor Clutch Wire with Intake Removed

A/C Compressor Clutch Wire with Intake Removed

Wire Break - Leak to Ground

Wire Break - Leak to Ground

So now the truck is fixed and I can operate! 73.


Category: Equipment

About the Author

Andrew is the owner of this blog and enjoys computer programming, building things, and photography. He's a pretty busy guy, which explains why updates to this blog are so infrequent.

Comments are closed.


%d bloggers like this:

This is the new server